OPTO Squad

Optoelectronics for IoV and VR Applications

 iov  vr
VCNL4020X01
Short-Range Proximity Sensor
vcnl4020x01

  • Distance up to 20 cm
  • Integrated proximity sensor and ambient light sensor, including infrared emitter
  • Programmable drive current to control range
  • 16-bit proximity resolution
  • AEC-Q101 Qualified

Resources:


TCUT1600X01 / TCPT1600X01
Tall Dome Transmissive Sensorstcut1600x01tcpt1600x01

  • Compact 5.5 x 4 x 5.7 (mm) SMD package
  • Single- and dual-channel devices
  • Tall dome design
  • Phototransistor output
  • Emitter wavelength of 950 nm
  • 3 mm gap width
  • Apertures of 0.3 mm
  • Moisture Sensitivity Level rating of (MSL1) for an unlimited floor life
  • AEC-Q101 Qualified

Resources:


VEMD5060X01
High Linearity PIN Photodiodevemd5060x01

  • Excellent photoresponse linearity
  • 5 x 4 x 0.9 (mm) top-view QFN package
  • Feature sensitive areas of 0.23 mm2, 0.85 mm2, and 7.5 mm2
  • Fast response times
  • High reverse light current to 38 μA
  • Designed for use with < 900 nm IR emitting diodes
  • ± 65° and ± 70° angles of half sensitivity
  • Wide temperature range of -40 °C to +110 °C
  • Wavelength of peak sensitivity of 820 nm or 840 nm
  • AEC-Q101-qualified

Resources


TCUT1630X01*
3-Emitter Transmissive Sensortcut1630x01-3

  • Higher dome for superior vertical headroom
  • 3rd emitter for vertical signal encoder for turn-and-push applications

* Pending release

VBPW34FAS
High-Speed PIN Photodiodevbpw34fas

  • Radiant sensitive area (mm2): 7.5
  • High radiant sensitivity
  • Daylight blocking filter matched with 870 nm to 950 nm emitters
  • Fast response times
  • High optical sensitivity
  • 6.4 x 3.9 x 1.2 (mm) SMD package

Resources:


VEMD5110X01
Low Profile PIN Photodiodevemd5110x01

  • 5 x 4 x 0.9 (mm) SMD package
  • Radiant sensitive area (mm2): 7.5
  • High radiant sensitivity
  • Daylight blocking filter matched with 870 nm to 950 nm emitters
  • Fast response times
  • High optical sensitivity
  • AEC-Q101 Qualified

Resources:


VSMY1850
High Speed IR Emittervsmy1850

  • 0805 standard surface-mountable package 2 x 1.25 x 0.85 (mm)
  • Peak wavelength: λp = 850 nm
  • High reliability
  • High radiant power
  • High radiant intensity
  • High speed
  • Angle of half intensity: ϕ = ± 60°
  • Suitable for high pulse current operation

Resources:


VSMY98545
High Power IR Emittervsmy98545

  • High power SMD with lens 3.85 x 3.85 x 2.24 (mm)
  • Peak wavelength: λp = 850 nm
  • High reliability
  • High radiant power
  • High radiant intensity
  • Angle of half intensity: ϕ = ± 45°
  • Low forward voltage
  • Designed for high drive currents: up to 1.5 A (DC) and up to 5 A pulses
  • Low thermal resistance: RthJP = 10 K/W

Resources:


VSMY3850
High Speed IR Emittervsmy3850

  • PLCC-2 surface-mountable package 3.5 x 2.8 x 1.75 (mm)
  • Peak wavelength: λp = 850 nm
  • High reliability
  • High radiant power
  • High radiant intensity
  • High speed
  • Angle of half intensity: ϕ = ± 60°
  • Suitable for high pulse current operation

Resources:

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE

The Products Described Herein and This Document are subject to Specific Disclaimers, set Forth at www.vishay.com/doc?91000

Follow Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

%d bloggers like this: